-
This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series, and also has a different backpack unit and leg thruster units than the previously-released green Zaku. Because of the nature of the Zaku, it doesn't have quite as many little gimmicks as the Gundam kit, but all the fun stuff you'd expect is here: fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. When completed, the kit stands 30cm tall and weighs about 500g. There are a whopping 548 pieces here, so be ready to spend some time putting this together (completion of mine, snap assembly only, took about 12 hours!). Includes figure of Char Aznable.
-
The PG Banshee Norn shares the same frame with the PG Unicorn Gundam but instead of the Unicorn's Gatlings and Bazooka you get that massive Norn backpack as well as the giant shield and parts to make the launcher for the rifle. The Banshee comes with that giant display base and Detron stickers for markings.
-
PG Exia arrived mid-February!
This incredibly detailed Perfect Grade kit of the Gundam Exia from "Gundam 00", except without the LED light set. Featuring a carefully engineered inner frame, it's fully posable after assembly and is loaded with weapons; a special base is included as well. -
Piloted by Banagher Links, the PG Unicorn is the first Perfect Grade Bandai kit in four years, and the most impressive to date. A spectacular separate LED kit can be purchased to bring Unicorn to life in light on display! Fans can expect an array of extraordinary features from this kit --
- A perfect reproduction of the transformation from Unicorn mode to Destroy mode (face guard expansion included)
- The full-body red Psycoframe employs special transluscent plastic for the 30-piece LED kit (sold separately) to shine through
- The blade antenna, which can be expanded or collapsed for transformation, utilizes a magnet to display a beautiful, single horn in Unicorn mode, and the inner parts of the horn expose colored gold in Destroy mode
- Elbows and knees are made to achieve the utmost range of movement without detracting from the appearance of their exteriors
- Armament units around the knees are moveable in every mode
- Shield x1
- Beam Magnum x1
- Beam Magnum backup cartridge x1
- Beam gatling gun x2
- Beam saber x4
- Beam bazooka x1
- Display base
- Detron stickers for all markings
-
The largest and most detailed plastic model kit in Bandai's history is finally here! With a kit this amazing, it's simply impossible to mention everything, so please be willing to settle for the highlights: 37 runners of parts (825 total pieces). About 50 locations secured by metal screws. Speaking of metal, the landing gear struts are die-cast. Five different locations light up on the finished kit (eyes, tail fin, beam saber and both wingtips, batteries included!). Full inner mechanism detail on all limbs. Opening panels on the head, chest (inc. cockpit) and more. Fingers are individually-jointed. Comes with two beam sabers, shield, two grenade packs and the huge beam rifle. Locking systems provide stability in both Wave Rider and Mobile Suit modes, so things don't flap around like they do on the Master Grade kit. Separate cardboard manual describes with concise photos how to transform between the two modes.
-
A brand-new RG kit of one of the most popular Gundams out there: the Wing Gundam from "Gundam Wing!" This kit recreates the original Wing Gundam as it first appears in the anime series. Various gimmicks and mechanisms have been crafted in 1/144 scale to allow the Wing to be displayed in poses straight from the anime. Articulation gimmicks have also been created in the wings to give them more bird-like posing abilities. [Features]:
- MS joints for use at the base of the wings
- Built-in gimmicks in the torso and shoulders to allow dynamic posing with the beam saber and beam rifle
- Can be transformed into Bird Mode by reconfiguring parts
- Action base support parts are included to support display in MS form or Bird Mode.
- Buster rifle x1
- Shield x1
- Beam saber x1
- Hand parts x3 pairs
- Weapon-grasping hand (right) x1
- Action base support parts x1
- Realistic decals
-
RG RX 93 Nu Gundam Scale : 1:144 Series : Char's Counterattack By Bandai
-
Designed by master mecha designer Hajime Katoki, Bandai's Master Grade ZZ Gundam Ver. Ka is fully transformable into the G-Fortress! The robot's torso forms the Core Block,which transforms into the Core Fighter; it can also combine with the Double Beam Rifle, Core Top (the Gundam's upper body) and Core Base (the lower body) to form the full G-Fortress. The forehead contains the powerful Hi-Mega Cannon. More mechanical detail has been added inside the gaps that open during transformation or posing, the knee joints have been improved with a sliding mechanism, and it also comes with its sizable backpack! In addition to the Double Beam Rifle, it's armed with two Beam Sabers and more.
-
The Gundam Exia Dark Matter is here! The Dark Matter booster can be separated from the main body and transformed into its bird form, and the detachable Dark Matter face mask is also included. Several weapons are included: the Prominence Blade, the Brinicle Blade, Dark Matter rifle, two Dark Matter blades, two beam sabers, and two short beam sabers. Molded in red, dark gray, violet and yellow, with clear pink, silvery gray and orange parts, as well as tetron stickers and foil stickers for markings. Instructions are also included.
-
[Includes]:
- Mace x1
- Sword x1
- 300mm glide gun x1
- Foil stickers x1
- Marking stickers x1
-
[Includes]:
- Foil sticker sheet
- Marking sticker sheet
- Tube (x1)
- Lead wire (x1)
- Screw (x14)
- Beam smart gun (x1)
- Display base (x1)
-
[Includes]:
- Beam Magnum
- Beam Saber (x2)
- Hyper Bazooka
- Shield
- Decals
- Foil stickers
-
Here's an amazing kit of the Thousand Sunny, as seen in the Wano Country arc of "One Piece"! Figures of the Straw Hat Pirates in their new outfits are included, and the cannon and paddle can be reproduced through parts replacement. Seals and water-transfer decals are included to reproduce the damage the Thousand Sunny had incurred when she entered the Wano Country, and in-scale mini models of the Shiromokuba No. 1, Mini Merry No. 2, and Shark Submerge No. 3 are also included. An exclusive display base is also included.
-
[Kit includes]:
- Beam Shot Rifle x1
- Beam Tomahawk x1
- Beam Saber x2
- Shield x1
- Funnel x6
- Missile x1
- Realistic decals
- Instruction sheet
-
[Includes]:
- Beam Magnum
- Hyper Bazooka (x2)
- Beam Javelin
- Hand Grenade (x8)
- Grenade Launcher (x2)
- Beam Gatling Gun (x6)
- Base for propellant tanks (x2)
- Beam Saber (x2)
- Shield (x3)
-
The joints on this sharply detailed MG kit are greatly improved to allow for a wider range of movement and are more capable of replicating action poses as seen in the show. The wings can open and close, and it comes complete with its signature weaponry along with in-scale unpainted figures of Shinn Asuka (sitting and standing) and Stella Loussier. Foil stickers and original design marking stickers are included for custom markings, plus a custom display stand to assist with dynamic action poses.
-
Like the Blue Frame, Lowe Guele's Astray Red Frame Kai boasts amazing articulation through the generous use of poly-caps. Once assembled, this MG will be able to stand in a variety of poses wielding its weapons. Its backpack can easily take on a several forms with some simple changes. As 'Tactical ArmsIIL' it can change between Flight Form, Delta Form, and V form. Its Sword Form changes to Work Form, whereas Arrow Form takes the shape of a giant bow. The Beam Torch can be held in the mech's hand or attached to the Arrow Form. The MG Astray also comes with its two signature katana; Gerbera Straight forged by Kiku Ichimonji and Tiger Pierce by Kotetsu. The two katana even feature signatures carved into the handles!! Two 1/100 scale figures of Lowe Guele, one sitting and one standing, are also included plus dry transfer decals and stickers for markings.
-
The latest Endless Waltz Master Grade is just like its predecessor but comes with those massive wings making it even bigger, faster, and more intimidating. Deathscythe Hell! Stand is not included.
-
The Epyon is molded in this gorgeous color and features expandable wings, moveable hand claws, and even the 'Dragon Mouth' opening on its feet! But best of all, MG Epyon is able to change shape into its flying form thanks to a uniquely designed skirt. Even the Epyon's flexible heat rod is included.
-
Amazingly detailed and highly articulated snap-together kit! Includes metallic gold accent decals. Display stand not included.
-
From the TV series "Gundam Seed", the Justice Gundam has finally been made into a Master Grade kit! Justice Gundam's multipurpose sublifter with movable beam cannons and machine cannons, the Fatum-00, can be configured into different flight positions on back and also as a flying mount for it to stand on. Once it's built, it's approximately 7" tall. Includes:
- Includes two beam boomerangs that be stored in shoulders, two beam saber, beam rifle, and laminate anti beam shield
- Runner x16
- Sticker sheet x1
- Marking sticker sheet x.1
- Dry decal x1.
- Instruction manual x1
-
Please note: The next MGEX Unicorn Gundam will be restocked in March 2023.
Celebrating the 40th Anniversary of GunPla and the 25th Anniversary of the Master Grade line, Bandai Spirits released a new line called Master Grade EXTREME! First in the EXTREME line is the RX-0 Unicorn Gundam. Its EXTREME Point is replication of its luminous Psycoframe system. Katoki Hajime, its original creator, has redefined and re-interpreted the mechanisms for the Gundam using the combined engineering progress made in the original MG release as well as the Perfect Grade and Real Grade versions to create his vision of the ultimate Unicorn Gundam without sacrificing movement or sculpt allowing for an impressive array of motion including a 160 degree bend in the legs. Throughout the Unicorn's body, special new flexible color changing LEDs have been designed to accommodate a wide range of movement of the model kit as well as transformation between Unicorn and Destroy Mode. The LEDs shift color from Red to Green and are also embedded in its Shield Funnels to allow recreation of scenes from the Anime. The transformation has been renewed allowing a more accurate and intuitive hands-on experience. The plastic model kit contains Beam Magnum, 6 Gatling Guns that can be mounted in Shields, 3 Shield Funnels that can combine, Bazooka, 4 Beam Sabers, and display stands to suspend the shields and MS Cage. Water Decals and metallic stickers by Katoki Hajime are also included. 3 AA Batteries required for LED system (Sold Separately). -
[Includes]:
- GN Sword IV
- GN Gamblade (x3)
- GN Sword V
- GN Sword Bit
- GN Shield
- Base for GN Sword IV
- Stickers
- Foil stickers
- Dry-transfer decals
-
FIGURE-RISE STANDARD SON GOKU (ULTRA INSTINCT)
