-
It comes with an Amuro themed stand with new special clear holders to display its remote weapons that can separate from its back. Its fingers are individually articulated and features a large payload of weapons including beam rifle, bazooka, shield weapon system, machine cannons and multiple beam sabers.
-
Yet another MG kit of the immensely popular Strike Gundam but this time it comes armed with the IWSP (Integrated Weapon Striker Pack) and ready for battle! The armaments include two anti-ship swords, Grand Slam, two rail guns, two cannons, one Midas Messer beam boomerang, a beam rifle, and a shield mounting a six-barrel gatling cannon. The IWSP can also be attached onto the MG Strike Rouge. A display stand, a custom markings decal sheet, and stickers are included.
-
Sharply molded in color, the transformable Impulse Gundam is formed by three main parts: Chest Flyer, Core Splendor, and Leg Flyer. Core Splendor's cockpit can be opened to insert an in-scale sitting pilot figure. In addition, landing gear are provided for both the Chest Flyer and Leg Flyer as a original gimmick that's never seen in the anime! The Sword Silhouette pack carried by the Silhouette Flyer can be attached to the back of the Mobile Suit to form Sword Impulse Gundam. Its weapons include a pair of Anti-Ship Laser Swords that can be combined into a double-bladed sword, a Beam Rifle, two Assault Knives, and an openable shield. The wing section of the Sword Silhouette pack is detachable for use as a giant boomerang, plus it can also be turned into a pair of Flash Edge beam boomerangs. Unpainted 1/100-scale figures of Shinn Asuka and Lunamaria Hawke (both molded in white) are packed in the set along with foil stickers, dry-transfer decals, and marking stickers to add detail to the completed model.
-
Turn A Gundam comes armed with a beam rifle, two beam sabers, a Gundam hammer, and a shield. Both the beam rifle and shield can be mounted on its back. A foil sticker is included along with a sheet of decals for custom markings.
-
[Includes]:
- Beam Magnum
- Beam Saber (x2)
- Hyper Bazooka
- Shield
- Decals
- Foil stickers
-
Manufacturer : Bandai Scale : Master Grade , 1/100 Series : MG Gundam UC Original : Mobile Suit Gundam -
Designed by master mecha designer Hajime Katoki, Bandai's Master Grade ZZ Gundam Ver. Ka is fully transformable into the G-Fortress! The robot's torso forms the Core Block,which transforms into the Core Fighter; it can also combine with the Double Beam Rifle, Core Top (the Gundam's upper body) and Core Base (the lower body) to form the full G-Fortress. The forehead contains the powerful Hi-Mega Cannon. More mechanical detail has been added inside the gaps that open during transformation or posing, the knee joints have been improved with a sliding mechanism, and it also comes with its sizable backpack! In addition to the Double Beam Rifle, it's armed with two Beam Sabers and more.
-
Amazingly detailed and highly articulated snap-together kit! Includes metallic gold accent decals. Display stand not included.
-
Please note: The next MGEX Unicorn Gundam will be restocked in March 2023.
Celebrating the 40th Anniversary of GunPla and the 25th Anniversary of the Master Grade line, Bandai Spirits released a new line called Master Grade EXTREME! First in the EXTREME line is the RX-0 Unicorn Gundam. Its EXTREME Point is replication of its luminous Psycoframe system. Katoki Hajime, its original creator, has redefined and re-interpreted the mechanisms for the Gundam using the combined engineering progress made in the original MG release as well as the Perfect Grade and Real Grade versions to create his vision of the ultimate Unicorn Gundam without sacrificing movement or sculpt allowing for an impressive array of motion including a 160 degree bend in the legs. Throughout the Unicorn's body, special new flexible color changing LEDs have been designed to accommodate a wide range of movement of the model kit as well as transformation between Unicorn and Destroy Mode. The LEDs shift color from Red to Green and are also embedded in its Shield Funnels to allow recreation of scenes from the Anime. The transformation has been renewed allowing a more accurate and intuitive hands-on experience. The plastic model kit contains Beam Magnum, 6 Gatling Guns that can be mounted in Shields, 3 Shield Funnels that can combine, Bazooka, 4 Beam Sabers, and display stands to suspend the shields and MS Cage. Water Decals and metallic stickers by Katoki Hajime are also included. 3 AA Batteries required for LED system (Sold Separately). -
[Accessories]
- Beam Rifle x 1
- Beam Shield x 1
- Beam saber blade x 2
- Marking sticker sheet x 1
-
[Accessories]:
- Display base x 1
- Wave effect x 1 set
-
Please note: Item will arrive last week of January 2023
-
Here's an amazing kit of the Thousand Sunny, as seen in the Wano Country arc of "One Piece"! Figures of the Straw Hat Pirates in their new outfits are included, and the cannon and paddle can be reproduced through parts replacement. Seals and water-transfer decals are included to reproduce the damage the Thousand Sunny had incurred when she entered the Wano Country, and in-scale mini models of the Shiromokuba No. 1, Mini Merry No. 2, and Shark Submerge No. 3 are also included. An exclusive display base is also included.
-
This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series, and also has a different backpack unit and leg thruster units than the previously-released green Zaku. Because of the nature of the Zaku, it doesn't have quite as many little gimmicks as the Gundam kit, but all the fun stuff you'd expect is here: fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. When completed, the kit stands 30cm tall and weighs about 500g. There are a whopping 548 pieces here, so be ready to spend some time putting this together (completion of mine, snap assembly only, took about 12 hours!). Includes figure of Char Aznable.
-
PG Exia arrived mid-February!
This incredibly detailed Perfect Grade kit of the Gundam Exia from "Gundam 00", except without the LED light set. Featuring a carefully engineered inner frame, it's fully posable after assembly and is loaded with weapons; a special base is included as well. -
The largest and most detailed plastic model kit in Bandai's history is finally here! With a kit this amazing, it's simply impossible to mention everything, so please be willing to settle for the highlights: 37 runners of parts (825 total pieces). About 50 locations secured by metal screws. Speaking of metal, the landing gear struts are die-cast. Five different locations light up on the finished kit (eyes, tail fin, beam saber and both wingtips, batteries included!). Full inner mechanism detail on all limbs. Opening panels on the head, chest (inc. cockpit) and more. Fingers are individually-jointed. Comes with two beam sabers, shield, two grenade packs and the huge beam rifle. Locking systems provide stability in both Wave Rider and Mobile Suit modes, so things don't flap around like they do on the Master Grade kit. Separate cardboard manual describes with concise photos how to transform between the two modes.
-
A whopping number of parts are included in the typically-large box -- besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.
-
The PG Banshee Norn shares the same frame with the PG Unicorn Gundam but instead of the Unicorn's Gatlings and Bazooka you get that massive Norn backpack as well as the giant shield and parts to make the launcher for the rifle. The Banshee comes with that giant display base and Detron stickers for markings.
-
The highly anticipated Perfect Grade Gundam Astray Red Frame has finally arrived! Gundam modelers around the world now get to build a spectacular 1/60-scale kit of the popular mecha piloted by Lowe Guele in "Mobile Suit Gundam Seed Astray"!
-
The GP01 includes two 60mm Vulcans, two beam sabers, and a beam rifle, as well as the Core Fighter II. For the GP01Fb, there are two extra beam guns, and you can build the Core Fighter II Fb. The kit also includes the parts to build a hangar/dock, with little figures of maintenance workers to position around it! A bonus card with a serial number on it also included.
-
[Includes]:
- Anti-beam cloak
- Beam Zanber
- Core Fighter
- Buster Gun
- Beam Shield
- Scissor Anchor x2
- Heat Dagger x2
- Beam saber x2
- Heat Dagger (for feet) x2
- Pilot figure
-
[Set Contents]:
- Refurbished Parts x1
- Progressive Knives x2 (normal and retracted)
- Pallet Rifle x1
- Hand Parts x7 (left and right hand)
- Umbilical Cable x1
- Realistic Decal x1
-
Evangelion Prototype Unit-00 DX Sniper Rifle Set [Set Contents]:
- Positron Rifle x 1
- Refurbished Parts x1
- Progressive Knives x2 (normal and retracted)
- Pallet Rifle x1
- Hand Parts x7 (left and right hand)
- Umbilical Cable x1
- Realistic Decal x1
-
[Includes]
- Progressive knife x2 (normal and stored)
- Pallet rifle
- Hand parts (x6)
- Umbilical cable
- Realistic decal